This the coating paste, wich is polymer modified, based on cement. It is avaible to use both in outer and inner places. It ise water impermeable. Any temperature difference has no effect on such coating plaster such as cracks, etc. It has high adherence property. It does not separate from the surface where applied.
Using Areas :
It is used in coating the heat isolation plates and coatings of extrude polystyrene, polyyurethane, stone woll and the similar plates. It is also avaiable to use in repairs of gross concrete, plaster, chip plate based on cement (betopan and similar), prefabricated brick blocks and prefabricated components.
Application :
25 kg of one bag ISONEM MA is added into 5 liters of water in container. A mixer is used to mix the product with water. If mixing is done by hand, small parties are separated and mixed thorougly. after blend had been prepared, paste is applied to the surface, where was prepared by the plaster net, in 3 mm or more. We recommend you to assemble the heat isolation plates by sticking with ISONEM M=! before plastering.
After plashad been finished, a very stronger coating could be done by means of applying the paint of ISONEM BE 99 elastic outer front paint on the surface.
| Consumption |
: |
4 kg/m2 |
| Storage |
: |
12 mounts in cool and dry places |
| Package |
: |
Craft bags of 25 kg |
|
